Thread and tubing are the same size.

1/4" - 3/8" Push-In Reducer.

2-Way Solenoid Valves (HIGH FLOW) This valve is a "high flow" valve that allows lots of air or water to speed through the solenoid and into your prop - and fast! Great for whistles, air blowing props, horns, or anything requiring a lot of air quickly...

3-Way Solenoid Valves (COMMON) A step up from 2-Way valves. These have an air inlet, an air outlet and an exhaust port. There are 3 main advantages to a 3-Way valve versus a 2-Way valve: 1. They allow a much greater amount of air to flow through the...

3-Way Solenoid Valves (COMMON) A step up from 2-Way valves. These have an air inlet, an air outlet and an exhaust port. There are 3 main advantages to a 3-Way valve versus a 2-Way valve: 1. They allow a much greater amount of air to flow through the...

2-Way Solenoid Valves (ECONOMY) These are simple electronic valve used to blow air only when you want it to.Think of them like the faucet for your garden hose. In your hose, water pressure is always pushing aginst the faucet, and only comes out the other...

2-Way Solenoid Valves (HIGH FLOW) This valve is a "high flow" valve that allows lots of air or water to speed through the solenoid and into your prop - and fast! Great for whistles, air blowing props, horns, or anything requiring a lot of air quickly...

4-Way Solenoid Valves (VERSATILE) These valves offer the most versatility as they can be used for anything. They actually have 5 ports: One port is for air going IN from your compressor. Two ports are for air going OUT to your prop's cylinders. 2 ports...

4-Way Solenoid Valves (VERSATILE) These valves offer the most versatility as they can be used for anything. They actually have 5 ports: One port is for air going IN from your compressor. Two ports are for air going OUT to your prop's cylinders. 2 ports...

Control your 12-volt lights and motors with this sturdy 12-Volt dimmer / speed controller. Controls up to a hefty 8 amps! Simply wire the device betwen your power coming from the outlet (or power pack) and your motor or lights. Turn dial to adjust speed...

Connects your air compressor to 3/8" airline.

Connects your air compressor to 1/4" airline.

Black polyethelene tubing is flexible and economical. For extra available pressure, we recommend running 3/8" lines from your compressor, and 1/4" lines to each prop.  500-foot roll of 1/4" Air Tubing.

Black polyethelene tubing is flexible and economical. For extra available pressure, we recommend running 3/8" lines from your compressor, and 1/4" lines to each prop. 500-foot roll of 3/8" Air Tubing.

Black polyethelene tubing is flexible and economical. For extra available pressure, we recommend running 3/8" lines from your compressor, and 1/4" lines to each prop. 25-foot roll of 1/4" Air Tubing. Also available in more flexible, durable polyurethane...

Black polyethylene tubing is flexible and economical. For extra available pressure, we recommend running 3/8" lines from your compressor, and 1/4" lines to each prop.  100-foot roll of 3/8" Air Tubing. Also available in more flexible, durable...

Foot Switch Trigger These heavy-duty foot switch triggers, are made of heavy-duty steel, with non-skid base and foot treadle pads, and comes with 15-foot leads. They are available with the exclusive LADC connector, or with stripped and tinned leads. The...

Allows swivel movement on the nose end of cylinder. Threads on to end of cylinder rod. This clevis locks securely for applications that require a lot of rough movement.

Step Mat Trigger Pressure sensitive mat detects when a guest walks on it, and triggers your prop. This is a must have in your Halloween arsenal of trigger props! Step Mat Trigger Flexible and water-resistant. 22"x14".

PIR Motion Trigger These sensors have a 16' cable and can detect passive infrared heat and motion when guests walk by. They will never know what hit them. This is one of the ultimate sensors in your repertoire of Halloween arsenal haunt. PIR Motion...

Threads on to the cylinder's shaft for added strength as a bumper or to attach to a pivot bracket. Excellent for building pneumatic props. Choose 1" bore or 1.75" bore.

Allows you to mount your cylinder to a solid surface. Great for pointing cylinder down and lifting an object to make it bounce. Fits 1" bore cylinder.

Pin allows you to mount a spherical rod end or clevis to cylinder to allow some movement of the cylinder. Also works well for nose mounting. Fits 1" bore cylinder.

Can be mounted at top or bottom of cylinder.